These safety controllers are designed to be used with Tapeswitch low-voltage sensors such as ribbon switches, safety mats, sensing edges, or sensing bumpers. PSCU safety interface modules may be ordered with 11-pin plug-in mounting (with or without a mounting base) or configured for DIN rail mounting.
|
PSCU Safety Controllers (Safety Interface Modules)
|
 |
 |
|
|
DIN Rail Mounted PSCU/1, PSCU/4
|
11-Pin Plug-In PSCU/2
|
|
|
Description
|
||
| PSCU series of safety controllers can be used as safety devices for low-risk automation and machine control applications. These CE Certified safety interface modules have a single form C output relay (normally open, common, normally closed). This output changes state when the connected sensor device is actuated and can be configured to remain in this state (latched with manual reset) or to automatically reset once the sensor is cleared. The PSCU safety controller can be configured as a manual reset or auto-reset by the user.
|
||
|
|
|
∙ Suitable for low-risk automation and machine control |
|
|
| MODEL | |||
| Supply Voltage | 110/240 VAC 50/60 Hz | 24 VDC | 24 VDC |
| Mounting | DIN Rail Mounting | 11-Pin Plug-In | DIN Rail Mounting |
| Reset Mode |
Selectable Automatic or Manual (Remote)
|
| Output Relay |
1 Form C, N/O or N/C, Non-Safety Relay
|
| Output Contact Rating |
4 A @ 240 V, Resistive, Non-Inductive
|
| Applications |
Control or Low-Risk Safety
|
| Safety Standard |
Level 0: DIN 31006-2, Category 1: prEn 954-1
|
