|
Print Page
|
|||||
|
KE - Sliding Door Interlock
|
||||
 |
||||
|
|
||||
| The KE Lock is a one piece access interlock comprising of a main body and sliding bolt. The lock is designed to suit sliding doors of various sizes and thicknesses. The interlock is manufactured in brass and comes with the brass figure or Q type lock portions and is suitable for use in dry, non-corrosive environments where the lock is subject to medium to heavy use. Typical industries using the KE Lock are Automotive and steel production. | ||||
|
|
||||
| The sliding door is locked and the bolt extended. To gain access, the key is inserted and turned which allows the bolt to be withdrawn and the door opened. The key remains trapped and cannot be removed unless the bolt is re-extended. | ||||
|
|
||||
|
The KE interlock is designed to operate as part of an integrated safety system, controlling access to hazardous areas. A typical example of machine isolation and access control is shown below.
 |
||||
|
|
||||
|
The isolation key in the FSAV, when turned, disconnects the air supply to the machine. This key can then be used to unlock the KE interlock on the guard door. The guard door can only be opened when the pneumatic power to the machine is off.
 |
||||
|
|
||||
| • Robust construction suitable for heavy duty or harsh environments. • Suitable for sliding guards, horizontal or vertical action. • Locking bolt length to suit customer requirement. |
||||
|
|
||||
|
