| Home > Light Curtains > Accessories |
| Cables, brackets, floor stands, mirrors, programming units, and tools for B-Series Light Curtain Systems. |
| Cable assemblies |
| Cable assemblies are used to connect the B-Series and GS-Series Safety Light Curtain sensing units to a controller or machine. The emitter has a 5-wire cable and the receiver has an 8-wire cable. One end of each cable has a keyed quick-disconnect connector and the other end is unterminated. The cables are IP68 rated, and UL and CSA recognized. Order cables separately. |
| Description |
Part Number |
 |
| Emitter Cable, 15ft. |
5 Conductor |
0972 |
| Emitter Cable, 30ft. |
5 Conductor |
0973 |
| Emitter Cable, 98ft. |
5 Conductor |
0976 |
| Receiver Cable, 15ft. |
8 Conductor |
0974 |
| Receiver Cable, 30ft. |
8 Conductor |
0975 |
| Receiver Cable, 98ft. |
8 Conductor |
0977 |
| Mounting Brackets (included) |
Mounting brackets are supplied with the B-Series and
GS-Series Safety Light Curtain sensing units. The brackets can be oriented to accommodate most installation requirements. They are designed to fit most commonly available structural framing systems.
Optional swivel, clamping, and vibration-damping brackets are also available. Call for information. |
 |
| Floor Stands (Part No. 0957) |
Floor stands are constructed from extruded aluminum. They are 5ft. tall with a steel base for permanently affixing to the floor. The base has adjustment hardware to assist in fine tuning the optical alignment of the light curtains.
All of the necessary hardware is provided with the floor stands to allow easy attachment to the mounting brackets provided with the B-Series and GS-Series Safety Light Curtain sensing units. Order floor stands separately. |
 |
| Mirror Assemblies |
| Mirror assemblies are used to change the direction of the emitter beams, allowing one light curtain to protect more than one side of a guarded area. They are provided with two pivot brackets for easy alignment. All of the necessary hardware is provided to allow attachment to floor stands. The actual length of the mirror is 4in. (100mm) larger than the active curtain length (sensing area) to facilitate a wide tolerance for height alignment. Order mirror assemblies separately. |
 |
| Curtain Length |
Mirror Assembly Length |
Part Number |
| 200mm (8in.) |
300mm (12in.) |
0960 |
| 300mm (12in.) |
400mm (16in.) |
0961 |
| 400mm (16in.) |
500mm (20in.) |
0962 |
| 600mm (24in.) |
700mm (28in.) |
0963 |
| 800mm (32in.) |
900mm (36in.) |
0964 |
| 900mm (36in.) |
1000mm (40in.) |
0965 |
| 1000mm (40in.) |
1100mm (44in.) |
0966 |
| 1200mm (48in.) |
1300mm (52in.) |
0967 |
| 1400mm (56in.) |
1500mm (60in.) |
0968 |
| Machine Guard Fences |
These mesh safety barriers provide additional guarding by filling in the gaps when a machine or work area configuration cannot be fully protected by a light curtain. They block these access points and prevent a worker from circumventing the light curtain and reaching into or squeezing into a dangerous area.
Machine guard fences are custom configured for each application. For more information, contact Tapeswitch with your requirements. |
 |
| Blanking Programming unit |
The blanking function allows selected areas of the sensing field to be disabled. This is useful for those applications in which objects, such as work piece supports protrude through the curtain. The B-SERIES and GS 140 SERIES light curtains are capable of being blanked for fixed and floating blanking.
The beam blanking function is set up using the BPU Programming unit. This device is used to teach the sensing unit when fixed blanking or floating blanking is required. One programming unit can be used to program any number of light curtains.
Two versions are available. For the B-SERIES light curtain model number BPU-2 (part no. 0953) is required. For the GS 140 SERIES light curtains model number BPU-4 (part no. 0753) is required. The programming units are not interchangeable from the B-Series to GS-Series. |
 |
| Laser Alignment Tool (Part No. 0956) |
The laser alignment tool simply snaps onto the emitter or receiver of the B-Series and GS-series Safety Light Curtain. It then provides a visual indication of the alignment between them.
This device is particularly useful when the emitter and receiver are separated by a long distance or when mirrors are involved in the application. |
 |
| |
|
 |
