Home > Light Curtains > GS-Series > GS-Series Safety Light Curtains
GS-SERIES SAFETY LIGHT CURTAINS
Description

The GS-Series Light Curtains are a full featured, cost effective microprocessor controlled light curtain set. The GS-Series Light Curtains are available in two versions.  The GS120 series, for low risk applications, per EN61496-1 (type 2). The GS140 series for high risk applications per EN61496-1 (type 4). Both series have a flexible interface that is compatible with common safety relays units, controllers and fail safe PLC’s. A wide range of sizes and resolutions are available.

The GS series emitter and receiver pair, by themselves, constitutes a complete light curtain system, which provides two redundant solid state PNP outputs in accordance with EN61496-1. These outputs can be interfaced directly the machine control circuit, provided that the circuit is compatible with PNP type outputs, (i.e. safety relays, emergency stop relay packages, Fail-Safe PLC’s, etc).

Features & Benefits
  • 2 unit system does not require controller
  • Easily interfaced with external devices
  • Redundant Fail-Safe PNP outputs
  • Beam blanking capability (GS 140 series)
  • Diagnostic Display  (Optional)
  • Rugged one piece extruded aluminum housing
  • EN61496 type 4 (GS140), type 2 (GS120)
  • CE certified and marked
  • SSR outputs available (GS 120 series)
  • Compatible with existing Tapeswitch controllers
  • Built in BLUE VIEW alignment beam,option on GS 140
  • General Specifications
    Detection Capability
    (Resolution)
    14mm, 30mm,70mm.
    Operating Distance

    6M (14mm units), 15M (30mm & 70mm units)

    Curtain Lengths up to 1.6M (6ft.)
    Safety Outputs 2 x PNP (fail safe)
    Response Time

    14mm detection, 20ms upto 300mm curtain, Additional 4ms for each 100mm of curtain.
    30mm detection, 20ms upto 600mm curtain, Additional 4ms for each 200mm of curtain.
    70mm detection, 20ms upto 1800mm curtain, Additional 4ms for each 600mm of curtain.

    Aperture Angle ± 2 ½ degrees (GS140)
    ± 5 degrees (GS120)
    Operating Temperature 0 to 50°C 
    Enclosure Rating IP65
    Cross Section 36 X 45mm
    Weight 200g (7oz) per 100mm
    Wavelength 880nm
    Radiation Intensity Class 1 LED Product (IEC60825-1)
    Explanation of Terminology
    EN 61496 Type 4 Design
    This is an international safety standard with particular requirements for equipment using active opto-electronic protective devices. It is the highest level of the most stringent standard in the world, acceptable and suitable for the most dangerous machines.
    CE Certification
    The CE mark is a European marking that indicates conformity with specific safety requirements of the European Union. CE certification means that a product has met these requirements.
    Beam Blanking
    Beam blanking allows selected areas of the sensing field to be disabled. This is useful in applications where fixed objects such as workpiece supports protrude through the light curtain and interrupt one or more beams.
    Fixed Blanking
    Specific beams are programmed to be obstructed and, consequently, disabled.
    Floating blanking
    An obstruction can move or ‘float’ within the detection zone without generating a stop signal.
    GS Series Models
    30 mm Resolution (GS120/140)
    14 mm Resolution (GS140)
    70 mm Resolution (GS120/140)
    P/N P/N P/N
    Length GS140 GS120 Length GS140 GS120 Length P/N Length GS140 GS120
    208mm 0701 0801 1408mm 0709 0809 208mm 0712 608mm 0721 0821
    308mm 0702 0802 1608mm 0710 0810 308mm 0713 808mm 0722 0822
    408mm 0703 0803 1808mm 0711 0811 408mm 0714 1008mm 0723 0823
    608mm 0704 0804 608mm 0715 1208mm 0724 0824
    808mm 0705 0805 808mm 0716 1408mm 0725 0825
    908mm 0706 0806 908mm 0717 1608mm 0726 0826
    1008mm 0707 0807 1008mm 0718 1808mm 0727 0827
    1208mm 0708 0808 1208mm 0719  
    For technical assistance on safety light curtains, accessories or additional lenghts,
    contact our factory at 1-800-234-8273 or email us at sales@tapeswitch.com