CONTROLMAT AND ARMORMAT SAFETY MATS
1. Specify the mat size.
Single ControlMat Safety Mats are available in sizes up to 48" x 192".
Single ArmorMat Safety Mats are available in sizes up to 48" x 120".
Larger multi-mat configurations are also available.

2. Pick a lead exit.
Mats are supplied with one 4-conductor cable.
The lead outlet options are:
LLS - Long side, Left end, Single lead
LRS - Long side, Right end, Single lead
SLS - Short side, Left end, Single lead
SRS - Short side, Right end, Single lead
Special lead exits are also available.
3. Pick a mat color.
Color choices are: Black, Yellow, and Blue.
4. Pick an edge treatment.
Choices are ramped (standard) or square.
5. Pick aluminum edging (trim), if required.
For ramped mats, use AE-1.
For square-edge mats, use AE-2, AE-3, or AE-13.
6. Pick a fail-safe interface controller, if required.
Choose a PRSU or PSSU model for high-risk applications.

DIAMOND PLATE SAFETY MATS
1. Specify the active area required.
Diamond Plate Safety Mats have 3.5" trim on each edge, which is inactive.
2. Pick a lead exit.
Mats are supplied with one 4-conductor cable. See the diagram above for options.
3. Pick a fail-safe interface controller, if required
Choose a PRSU or PSSU model for high-risk applications.

SAFETY ZONE SENSING MATS
1. Specify the mat size.
Safety Zone Sensing Mats are available in sizes up to 40" x 60". Custom sizes are available.
2. Specify the mat surface.
Choices are: ribbed, eurodot, and smooth.
3. Pick a mat color.
Color choices are: Black or yellow. Custom colors are available.
4. Pick an edge treatment
Choices are: ramped or square.
5. Pick aluminum edging (trim), if required.
For ramped mats, use AE-1.
For square-edge mats, use AE-2, AE-3, or AE-13.
6. Pick a fail-safe interface controller, if required.
Choose a PRSU or PSSU model for high-risk applications.
Note: Standard lead location is mid-point on short side. Other locations optional.