|
|
|
Description |
Tapeswitch SD-75 Dual-Switch Sensing Bumpers offer a unique sensor configuration which produces one or two output signals, depending on the severity of impact and extent of deformation. On initial contact with an obstruction, a leading edge ribbon switch activates, which can be used to trigger a stop command or contact alarm. If the sensing bumper continues to collapse, a second switch activates, which can initiate an emergency stop or reverse command.
SD-75 pressure-sensitive bumpers are available in 4 or 7 inch widths, up to 14 inches high, and up to 12 feet in length. Tapeswitch can provide various colors, as well as a range of sensitivities and compression characteristics. These sensing bumpers are mounted is by means of studs or threaded holes, as required. |
| Features & Benefits |
• One or two output signals, depending on severity of impact
• Large sensing area for maximum protection
• Fully assembled for easy installation
• Interfaces easily with external controls
• Available in lengths up to 12 feet
• 4-lead fail-safe wiring is standard
|
|
|
|
• Automatic guided vehicles
• Moving work platforms
• Large moving doors
|
• Mobile conveyors
• Telescoping equipment
• Passenger loaders
|
|
|
| Specifications |
| Exterior Housing: |
Dynalon reinforced nylon cloth, PVC, or EPDM |
| Recommended Voltage & Current: |
24 Vac or Vdc at 1.0 amps max. |
| Colors: |
Black , yellow, or red, depending on material |
|
