|
SE-45 & SE-75 Sensing Bumpers
|
 |
|
Tapeswitch SE-45 & SE-75 Sensing Bumpers are designed for general-purpose, heavy-duty applications. They provide a large, compliant surface that protects personnel or equipment by detecting contact or impact before damage is done. Sensitivity is 20 lbs nominal, with substantial overtravel cushioning. These pressure-sensitive bumpers feature easy bolt-on mounting with adjustable bolt locations.
|
|
The exterior housing of these sensing bumpers is constructed from EPDM rubber, which is resistant to water, oil, hydraulic fluids, and coolants. The internal switching elements are rated for 3 million operations at any point. All SE Series pressure-sensitive bumpers are supplied with 4-lead, fail-safe wiring and are compatible with Tapeswitch Interface Controllers.
|
 |
|
|
| Features & Benefits |
- Large sensing area maximizes the collision zone
- Less than 10% compliance before activation
and 60% over travel cushioning after activation
- Straight and corner configurations available
- Available in lengths up to 12 ft
|
|
|
 |
| Applications |
- Collision detection on AGVs, mobile work platforms, and material handling vehicles
- Obstruction detection on large moving doors, mobile work stations, and telescoping conveyors
- Protection of stationary devices in proximity to moving equipment
|
 |
| Specifications for SE-45 & SE-75 Pressure-Sensitive Bumpers |
| Actuation Force |
Less than 10 lbs nominal |
| Recommended Voltage & Current |
28 Vac or Vdc at 1.0 amps max |
| Housing |
Fiber-reinforced EPDM rubber |
| Environment |
-10 to 155 °F (-23 to 68°C) |
|
| |