|
Sensor-Ring Circular Sensing Edge
|
|
A pressure sensitive safety edge that provides an exact fit
for circular geometries and
is available as a full or partial circle
|
 |
|
The Sensor-Ring Circular Sensing Edge from Tapeswitch offers a unique and effective solution for applications requiring a large curved or circular sensing element. It replaces multi-piece, multi-switch solutions with a single, curved, pressure sensitive sensing edge that provides contact closure at any point. The hollow-ring design permits pass-through of wires, components, or personnel.
|
|
The Sensor-Ring Pressure Sensitive Safety Edge is constructed with a Santoprene TPE housing which is resistant to water, oil, hydraulic fluids, and coolants. It is available in partial or full circle models with diameters up to 5 ft. Mounting can be customized to suit the application. All Sensor-Ring Sensing Edges are supplied with 4-lead fail-safe wiring and are compatible with Tapeswitch Safety Controllers.
|
 |
|
|
| Features & Benefits |
- Exact fit for circular geometries
- Diameters 2.5 to 5 ft. in partial or full circle
- Continuous switch activates at any point
- 0.75 in. of cushioned over travel
- Hollow center permits pass-through
|
|
|
 |
| Typical Applications |
| Safety sensing or activation for: |
- Medical scanners
- Large rotating machinery
- Multi-station turntables
- Automatic inspection equipment
- Any curved sensing application
|
|
| Options |
- Sensing on up to 3 sides
- Multiple sensing zones
- Application-dependent mounting options
- Choice of back, end or side lead exit
- Stainless steel armored cable available
|
|
|
 |
| Specifications for the Sensor-Ring Circular Sensing Edge |
| Diameter |
2.5 ft to 5.0 ft |
| Circular Segment |
10 to 360 degrees |
| Actuation Force |
Less than 10 lb (44 N) nominal |
| Overtravel |
0.75" (19 mm) after activation |
| Recommended Voltage & Current |
28 Vac or Vdc at 1.0 amps max. |
| Exterior Housing |
Santoprene TPE |
| Environment |
IP67, -10 to 140 °F (-23 to 60°C) |
|
| Contact Tapeswitch with your application requirements. |