- Contact Info
General purpose ribbon switches designed for activation by hand, foot, or mechanical device. These switches have a PVC exterior.
Actuation force is 8 oz. (2 N)
Mounting is by aluminum channel or double-faced tape.
Length is cut to customer requirements.
Note: All ribbon switches can be supplied with a black TPE exterior for enhanced moisture and chemical resistance. Add "E" to the type designation, e.g., 151-BBWE, to specify.
• Custom switch lengths
• Custom lead lengths
• Fail-Safe leads
• Air leak test
• Adhesive backing
• Interconnected switches (sausage style)
Custom colors are available on request. Please contact the factory.
|Ribbon Switch Type||Channel||DA-32 Double-Faced Tape|
|Actuation Force:||8 oz. (2 N)|
|Bending Radius:||1/8 in. (6.5 mm) minimum|
|Exterior Covering:||PVC (standard) or TPE (optional)|
|Lead Wire:||#22 AWG, 18 in. (460 mm) long|
|Dimensions:||9/16 in. wide, 3/32 in. high (14.3 mm x 2.4 mm)|
|Recommended Voltage & Current:||24 VAC or VDC at 1 amp max.|
|Dielectric Resistance:||1000 VAC for 2 minutes|